Steering
Steering is achieved by pointing the steering handle in the direction that you want to go, turn it left to go left and right to go right. This turns the rear wheel like the rudder of a boat. Sounds simple? It is, but it can take a few moments to get used to.
Pointing the Steering Handle left or right changes the angle of the rear wheel, affecting a turn. The Steering Handle position dictates the position of the rear wheel at all times, so bear this in mind. If the Steering Handle isn’t straight, i.e. in line with the rest of the drive lever, you won’t go in a straight line.
Like many vehicles, any steering input must be combined with speed or drive to affect a turn. You will often need to push one or both of the drive levers whilst pointing and holding the Steering Handle in the desired direction. This can take some practice before it becomes smooth.
It is also recommended to practice turning and get a feel for the turning circle of the Trike in a flat and smooth area that’s free of obstructions before moving onto more challenging terrain or busy or confined spaces.
It is important to consider your speed when attempting turns. At low speed, tight turns with the handle at ‘full lock’ are possible allowing the Trike to turn in its own width. However at higher speeds, it is best only to make gradual turns with small amounts of steering lock as sudden tight turns at speed increase the risk that you may loose control and fall.
CAUTION - The steering is sensitive, be careful not to over steer, modify your speed with the tightness of the turn and where possible leaning into the turn (leaning left to turn left and leaning right to go right) may benefit cornering.